J07 - Projector Clock
J20 - 7 Colors LED Clock
K03 - Projector Clock

J20 7 Colors LED Clock

Special features of this compact alarm clock include temperature readings, a countdown clock, 8 famous tunes, and the 7-color changing backlight.

To use this product, you will need 3 "AAA" batteries. Place them correctly in the battery compartment.

All setting buttons are located on the bottom of the clock.

There are 5 different modes: time, temperature, date, alarm, and timer. To toggle between these 5, press the "M" button or lightly push the screen.

Setting the Time

1. Enter into the Time mode by toggling the modes until "TIME" is displayed on the screen.

2. Press the "S" button once to switch back and forth between 12- and 24-hour time.

3. Press and hold the "S" button for 3 seconds and the hour digit will blink. Change the hour by pressing the up and down arrow buttons.

4. Press the "S" button again and the minute digit will blink. Change the minutes by pressing the up and down arrow buttons.

5. Once the correct time is entered, press the "S" button and the time is now set.

Setting the Date

1. Switch to the Calendar mode by toggling the modes until "DATE" is displayed on the screen.

2. Press and hold the "S" button for 3 seconds and the year will appear blinking. Adjust the year by pressing the up and down arrows.

3. Press the "S" button again and the month digit will blink. Adjust the month by pressing the up and down arrows.

4. Press the "S" button again and the days digit will blink. Adjust the days by pressing the up and down arrows.

5. Press the "S" button again to set the Date. The day of the week will automatically change according to the year, month, and day.

Setting the Alarm

1. Switch to the Alarm mode by toggling the modes until "AL" is displayed on the screen.

2. Press and hold the "S" button for 3 seconds and the hours digit will blink. Adjust the hour by pressing the up and down arrows.

3. Press the "S" button again and the minute digits will blink. Adjust the minutes by pressing the up and down arrows.

4. Press the "S" button again and the alarm is set.

5. Turn on the alarm by pressing the "S" button and the alarm symbol will appear on the screen to indicate that it is on.

6. Press the up and down arrows in Alarm mode to choose an alarm sound. When the alarm goes off, it will sound for 60 seconds or until it is stopped. To turn off the alarm, simply push the screen.

Setting the Countdown Timer

1. Switch to the Countdown mode by toggling the modes until "TIMER" appears on the screen.

2. Press and hold the "S" button for 3 seconds and the minute digit will blink. Adjust the minutes by pressing the up and down arrows.

3. Press the "S" button again and the seconds digits will blink. Adjust the seconds by pressing the up and down arrows.

4. Press the "S" button again to set it.

5. To start the timer, press the "S" button and to stop it, press the "S" button again. When the timer reaches zero, the clock will beep.

6. Anytime the timer is not running, the up arrow can be pressed to reset it to the set countdown time, and the down arrow can be pressed to set it to zero.

Temperature setting

The temperature does not need to be set. However, you can switch between degrees Celsius and degrees Farenheit. Do this by pressing the "S" button in the Temperature mode.

Notes

Please replace the batteries if you notice that the alarm sound is lower than normal, the display is blurry, there is no color light display, and/or the digits are faded.

Press the "RESET" button if you experience any strange events with the alarm clock.

You will need to set the clock again after replacing the batteries.

Back to top

K03 Projector Alarm Clock

All buttons and two switches are located on the bottom of the clock. Use your fingernail to press the button down precisely when setting time/date/etc.

The Mode button cycles through the screens.
From left to right across the middle of the display area, there are icons to highlight the active/current screen.

To Set the Time:
From the Time/default display, press and hold the Set button approx. 3 seconds until the 24 hr/12 hr starts blinking. Use the Up/Down button to switch between a 12-hour clock and a 24-hour (military) clock.

Press Set again while the 12/24 is blinking to set the current time. The hour unit will blink, use the Up and Down buttons to adjust the hour. Press the Set button again to set the minutes, and do so with the Up and Down buttons.

To See the Temperature:
From Time/default display, press Mode twice to see the temperature. When the temperature is displayed, press the Set button to switch between Celsius and Fahrenheit.

Setting the Date & Viewing it:
From the Time/default display, press Mode three times to see the year displayed. To set the year, hold in Set for 3 seconds until the year blinks. Use the Up/Down buttons to adjust.

After setting the year, press Set again to set the Month and Day.  You will see a blinking "M" and "D". Press the Up/Down buttons to view in Day/Month format or Month/Day format. After setting that, press Set again to set the month (as 1 thru 12) & day's date (The weekday will automatically adjust itself based on the current year, month, and day setting.). Use the Up/Down buttons to adjust, and use Set to move from the Month to the Day setting.
Viewing the Date:
From the Time/default display, press Mode four times to see the current weekday, date, and month.

To Set the Alarms:
From the Time/default display, press Mode five times to set the alarms.

When Alarm 1 displays hold in Set until the hour unit blinks. Use the Up/Down to adjust. Press Set again to highlight the minutes and change them with the Up/Down buttons. Press Set twice again to choose an Alarm sound. Use the Up and Down buttons to move through the list of available alarm tones.
Use the Mode button to move on to Alarms 2 & 3. Set them the same way as Alarm 1.

To Set the Celebration Alarm (Candle Icon):
You can set this special alarm to go off for a specific date & time such as a birthday. Keep pressing the Mode button (not holding it steadily, just keep pushing & releasing it) until the candle on the right side of the screen is lit up. You will see the year blinking, set it the same way as before with the Up/Down buttons, and the press Set again twice to move to the next screen. The clock will prompt you to adjust the date, month, and time. Happy Birthday!

To Use the Timer:
Keep pressing the Mode button (not holding it steadily, just keep pushing & releasing it) until the Timer hourglass is lit up. Use the Set button to begin counting and to stop.

To Use the Projector:
Push downward gently on the ball on the top. The display will be projected.

Back to top

Troubleshooting

Q.  I put in the batteries, but why isn't the clock turning on?

A.  Check the batteries. Make sure you put the batteries in according to the polarity (the springs touch the negative (-) end of the battery).

Q.  Why is the screen so dim?

A.  The batteries may be running low. Check the batteries or change to a fresh pair.

Q.  I set the alarm, but why isn't it going off?

A.  Make sure that the corresponding AM and PM for the time and the alarm match. If it's in PM time, the face of the clock will say "PM" and if it's set in AM, it will be blank where the PM was.

     Also, make sure that you have turned on the alarm mode by pressing the button with the bell symbol on it until you see it appear on the clock face.

Back to top

Return to Product Support Page